For large ground power stations, the reliability of cable connection system is very important. Once the fault occurs, it will not only affect the power generation efficiency, but also cause serious safety accidents. Therefore, as a key core component of the photovoltaic connector, its performance indicators must be strictly checked.
SHUNKONN's MCY10-3M3FPLN01 is an "invisible guardian" designed for the needs of 1000V high-voltage photovoltaic power plants. This 3-in-1 branch bus connector integrates many black technologies and has excellent performance in terms of security, reliability and ease of use.
(Click on the picture for details)
Super protection against harsh environment
Photovoltaic power plants are located in remote wilderness, desert and other harsh environments, connectors not only to withstand the harsh climate test, but also may encounter a variety of external damage. Therefore, the protection performance is an important indicator to measure the quality of the connector.
The MCY10-3M3FPLN01 is designed with IP68 protection to ensure reliable dust and water resistance in extreme environments such as storms, sandstorms or high temperatures. Even if the whole body is immersed in water, it will not cause any impact on the internal electrical components.
In addition, the connector shell is made of PPO environment-friendly flame-retardant material, which has excellent characteristics such as high strength, heat resistance and chemical corrosion resistance. Even if it encounters 85℃ high temperature or acid and alkali corrosion, it can also run stably, greatly extending the service life.
The MCY10-3M3FPLN01 can maintain long-term reliable operation even in the harsh temperature range of -40 ° C to +135 ° C.
(Click on the picture for details)
30A high current efficiency is not discounted
The electricity demand of large photovoltaic power stations is more concentrated, and the current carrying capacity of connectors is very high. The MCY10-3M3FPLN01 has a rated current of up to 30A, which fully meets high current application scenarios.
The use of high-quality tinned copper conductor, excellent conductivity, resistance is only 0.35mΩ, greatly reducing the heat loss. Even under maximum load conditions, the connector can maintain low temperature operation, eliminating safety risks caused by excessive heat.
This not only ensures the reliability of the power supply, but also improves the energy conversion efficiency of the entire photovoltaic system, creating more economic value for the owner.
1000V high voltage is safe and secure
As a key component of 1000V high voltage photovoltaic systems,MCY10-3M3FPLN01 also has excellent insulation properties.
The precise design of the insulation structure, the use of PPO environmental protection flame retardant material, even in harsh environments can reliably isolate high-voltage conductive parts, effectively prevent the occurrence of leakage and short circuit. More importantly, it meets DCII level safety standards and has reliable protection against grid interference and lightning strikes.
Even in extreme situations such as lightning strikes or power grid instability, the MCY10-3M3FPLN01 can effectively protect critical components from damage, greatly reducing the risk of system operation, and providing a strong guarantee for the life and property safety of owners and users.
(Click on the picture for details)
Fast connection with high construction efficiency
For large power plant construction, cable connection is a very time-consuming process. The MCY10-3M3FPLN01 features an innovative self-locking fast connection design that can be firmly locked with a single tap, greatly reducing the time cost of site construction.
At the same time, the connector also supports a removable structure, which facilitates regular inspection and maintenance, helping to improve the reliability of the entire photovoltaic system. Compared with the traditional bolted connection, the MCY10-3M3FPLN01 undoubtedly greatly improves the installation efficiency and simplifies the field operation process.
This is of great significance to accelerate the construction progress of the power station and the subsequent operation and maintenance management. It can be said that MCY10-3M3FPLN01 is the right-hand man for the construction of large-scale photovoltaic power stations.
Widely used to lead the industry development
The MCY10-3M3FPLN01 not only performs well in terms of performance indicators and reliability, but also has a wide range of applications. This connector is widely used in various large-scale ground power stations and industrial and commercial distributed photovoltaic projects, fully demonstrating its excellent "invisible guardian" strength.
SHUNKONN, with its professional research and development capabilities and advanced production lines, continues to introduce innovative products to meet the needs of the market, and the MCY10-3M3FPLN01 is one of the best. With high-quality products and excellent services, the company creates more value for customers, and continues to lead the pace of the solar photovoltaic connector industry.
You can also contact us directly in the following ways: visit, telephone, email
telephone
Contact US